LED Strip Multi-colour (RGB) SMD5050 60 LEDs/m IP65 | 5 meters

In brief

•  IP65 For outdoor or damp areas
• Easy to cut or extend
• Extension: 12V max. 10m - 24V max. 20m
• Energy efficient - 14.4W p/m
• 60 LED chips p/m
• Dimensions: 5000x10x2.3 mm
• Strong 3M adhesive strip for easy mounting
• Excl. power adapter
• Average lifespan 13.5 years (10 hours per day)
• 3 years warranty

High quality

This RGB LED strip is made of high-quality plastic and has an epoxy protective layer to keep the strip waterproof. The back has a 3M adhesive strip making it very easy to install. The strip has a standard length of 5 meters, but this can be easily adjusted by cutting the strip or connecting multiple strips together. This SMD5050 LED strip has a protection rating of IP65. This means the strip is resistant to water or moisture. The strip can be placed in damp areas or outdoors between temperatures of -25°C to 40°C.

Waterproof LED Strip

This LED Strip has an IP65 rating. It is waterproof and dust-free, so it can be placed in damp areas. The strip is protected against water up to 100 liters per minute (a tap provides about 12-16 liters per minute).

Read more about IP ratings and lamp protection here

Extending or cutting the LED strip

This RGB SMD5050 LED strip is very easy to cut to shorten or extend. Cutting can be done in the middle of the copper plates where a + and - are marked. These can easily be clicked into a connector or sealed with a cap.

With a voltage drop of approximately 0.1V per meter, the brightness of the LEDs remains consistent over the entire length of the strip. For optimal performance, we recommend extending the LED Strip up to the following lengths:

LED Strip 12V

For optimal performance, we recommend not extending this 12V strip longer than 10 meters. This ensures an even light effect without noticeable brightness loss.

LED Strip 24V

For optimal performance, we recommend not extending this 24V strip longer than 20 meters. This ensures an even light effect without noticeable brightness loss.

The right power supply

To connect the LED strip, you need a power adapter. This LED strip operates on 12V/24V and must be powered with an adapter. Choosing the right adapter is important to get the maximum out of the LED strip and to prevent insufficient power supply to the strip.

Make sure the total wattage of the power adapter is at least 20% higher than the power consumption of the LED strip. (Example: 5 meters = 72W | 72x1.2= 86.4 | So a power adapter with a capacity of at least 86.4W is needed. We recommend 100W.

LED Strip 12V

• 1m-5m: Power adapter IP67 12V 100W
• 5m-10m: Power adapter IP67 12V 200W

LED Strip 24V

• 1m-5m: Power adapter IP67 24V 100W
• 5m-10m: Power adapter IP67 24V 200W
• 10m-15m: Power adapter IP67 24V 260W
• 15m-20m: Power adapter IP67 24V 350W

RGB Controller with remote control

This controller is optional and suitable for both 12V and 24V RGB LED strips. This controller operates on batteries and uses wireless RF technology, allowing you to effortlessly adjust colours, brightness, and lighting modes without being restricted by cables or limitations.

Applications for LED strips

This LED strip is suitable for both commercial and private use. The LED strip is often used in the following situations: trade show construction, escape rooms, shops, cafés and restaurants, public transport, living rooms, bedrooms, etc.

The possibilities are endless. Think, for example, of lighting along stair steps, lighting in cabinets, or lighting under a sofa or bed. In cafés, LED strips are often used to illuminate the bar. LED strips are also often used as ceiling lighting in a cove.

RGB - Coloured light

To determine the right light colour, it is important to know the purpose of the light. Our RGB lighting offers you the possibility to choose and adjust any desired colour for a unique and personal atmosphere.

Click here for more information about light colour