LED Strip SMD5050 60 LEDs/m | 5 meter

In short

• Easy to cut or extend
• Extending: 12V max. 10m - 24V max. 20m
• Energy-efficient consumption - 14.4W p/m
• Light output: 1440lm p/m
• 60 LED chips p/m
• Dimensions: 5000x10x2.3 mm
• Strong 3M adhesive edge for easy installation
• Excl. power adapter
• Lasts on average 13.5 years (10 hours a day)
• 3 years warranty

High quality

This LED strip is made of high-quality plastic and is very flexible. The back has a 3M adhesive strip making it very easy to place. The strip has a standard length of 5 meters, but this can easily be adjusted by cutting the strip or by connecting multiple strips together. This SMD5050 LED strip has a protection rating of IP20. This means that the strip is not resistant to water or moisture. Therefore, place the strip only indoors between a temperature of -25°C to 60°C.

Extending or cutting LED strip

This SMD5050 LED strip is very easy to cut to shorten or extend. Cutting can be done in the middle of the copper plates where a + and - are indicated. These can easily be clicked into a connector or capped with a cover.

With a voltage drop of about 0.1V per meter, the brightness of the LEDs is maintained over the entire length of the strip. For optimal operation, we recommend not extending the length of this 12V strip longer than 10 meters. This way, you maintain an even light effect without noticeable loss of brightness.

LED Strip 24V

For optimal operation, we recommend not extending the length of this 24V strip longer than 20 meters. This way, you maintain an even light effect without noticeable loss of brightness.

The right power supply

To connect the LED strip, you need a power adapter. This LED strip operates on 12V/24V and must be converted with an adapter. Choosing the right adapter is important to get the most out of the LED strip but also to prevent too little power from flowing through the strip.

Ensure that the total wattage of the power adapter is at least 20% higher than the wattage of the LED strip. (Example: 5 meters = 72W | 72x1.2= 86.4 | Therefore, a power adapter with a power of at least 86.4W is needed. We recommend 100W)

LED Strip 12V

• 1m-5m: Power adapter 12V 100W
• 5m-10m: Power adapter 12V 200W

LED Strip 24V

• 1m-5m: Power adapter 24V 100W
• 5m-10m: Power adapter 24V 200W
• 10m-15m: Power adapter 24V 260W
• 15m-20m: Power adapter 24V 350W

Applications for LED strips

This LED strip is suitable for both commercial and private use. The LED strip is often used in the following situations: Stand construction, escape rooms, shops, cafés, and restaurants, public transport, living rooms, bedrooms, bathrooms, etc.

The possibilities are endless. Think of lighting along stair treads, lighting in cabinets, or lighting under a couch or bed. In cafés, LED strips are often used to illuminate the bar. LED strips are also often used as ceiling lighting in a recess.

Light Color

To determine the right light color, it is important to know what the light is for. Below is described where the different light colors are most commonly used.

• 2400K has a soft orange glow. Comparable to candlelight or a late sunset. Ideal for a nice warm homely and calming atmosphere in, for example, living rooms, cafés, restaurants, and other spaces that do not require bright light.
• 3000K has a somewhat yellow/orange glow and is slightly brighter than 2700K but still warm. Ideal for a nice warm homely and calming atmosphere in, for example, living rooms, waiting areas, cafés, restaurants, corridors, and other common areas.
• 4000K has a white/yellow glow. Ideal for a well-lit space where good visibility, focus, and a pleasant atmosphere are desired, for example, in offices, classrooms, kitchens, corridors, shops, fitting rooms, hair salons, stairwells, or waiting areas.
• 6000K has a white/light blue glow. Ideal for a well-lit space where good visibility and concentration are desired, for example, in hospitals, laboratories, workshops, studios, and garages.

Click here for more information about light color