SMD5050 LED Strip 14.4W/m 60 LEDs/m RGB 12V | Set 5m
5m 12V RGB LED strip with remote control Coloured lighting can change the appearance of a room without replacing the strip. This 5m SMD5050 RGB LED strip set on 12… View full description ↓


2 years warranty- Choose colours by RF remote
- 60 RGB LEDs per metre
- Controller and power supply included
SMD5050 LED Strip 14.4W/m 60 LEDs/m RGB 12V | Set 5m - RGB is backordered and will ship as soon as it is back in stock.
50+ in stock
Order before 3 pm, ships today
Secure and easy payment with the method you prefer.
- Free shipping in NL & BE from €69.95
- Available directly from stock
- Rated 9.2/10 by customers
- Up to 5 years warranty
SMD5050 LED Strip 14.4W/m 60 LEDs/m RGB 12V | Set 5m - RGB is backordered and will ship as soon as it is back in stock.
5m 12V RGB LED strip with remote control
Coloured lighting can change the appearance of a room without replacing the strip. This 5m SMD5050 RGB LED strip set on 12 V is operated with an RF remote for colour and brightness. The power supply requires permanent wiring, so this is not a Plug & Play set with a mains plug.
Key features
- LED technology: SMD5050 RGB, 60 LEDs per metre: red, green and blue in one LED.
- Power: 14.4 W/m; approximately 72 W over 5 m, with a 100 W supply.
- Strip width: 10 mm wide; IP20 for dry indoor areas.
- Warranty: 2 years on the complete set.
What is included in the set?
- 1x SMD5050 RGB LED strip, 60 LEDs/m, 14.4 W/m, 5 m, 12 V, 10 mm wide, IP20
- 1x RGB controller with remote control (RF, 12-24 V, maximum 12 A)
- 1x 12 V 100 W LED strip power supply with screw terminals (no plug)
- 1x 10 mm RGB connector with cable, four-pin (strip to controller)
Connecting the RGB controller and fixed-wiring 12V supply
Permanently wire the 230 V side of the 12 V supply via the screw terminals, using an installer if unsure; there is no plug. Install the RGB controller between supply and strip, connected with the four-pin connector. At 12 V, use no more than 5 m per power feed.
Coloured light at home and in shops
Add colour along a desk edge in a child’s bedroom, behind a shop display wall or near a music area at home. The strip is rated IP20 and belongs in a dry indoor space.
Should you choose RGB at 12V or 24V?
This set is intended for a 5m line on 12 V. For a continuous 10m RGB light line from one power feed, choose the 10m 24 V RGB set.
Colour and brightness via RF remote control
The included RGB controller and RF remote adjust both colour and brightness across the full strip.
-
Certifications
-
Warranty
-
Beam angle
-
Type LED
-
Wattage
-
Power
-
Dimmable
-
Voltage
-
IP Rating
-
Operating hours
-
Ambient temperature
-
Adhesive strip




