LED Strip Driver 12V/24V | 35W

35W LED strip power supply for a compact fixed installation

A small illuminated recess or a short strip under a shelf often needs only a compact supply. This 35 W LED strip power supply is intended for fixed indoor wiring, with connection terminals rather than a separate plug-in adapter.

Key features

• 35 W power rating, with a recommended connected LED strip load of approximately 28 W.
• 12 V or 24 V DC, depending on the selected voltage variant.
• Maximum output current: 12 V up to approximately 2.9 A; 24 V up to approximately 1.5 A.
• IP20 housing for dry indoor areas.
• 230 V connection via screw terminals, without a plug.

A small supply for cabinet or ceiling lighting

For a lit recess at home or a short ceiling strip, check the electrical load first. This IP20 supply needs a dry mounting position. Connect the 230 V wiring permanently through the terminals, or use an installer if unsure.

12V or 24V: which 35W version?

The strip determines the output voltage: select 12 V for a 12 V strip and 24 V for a 24 V strip. Add up the strip consumption and use approximately 28 W as a guide rather than the full 35 W. Higher-load lighting runs need a larger supply.