LED UFO Highbay 200W 150lm/W Philips LED Driver IP65 Dimmable

In short

• 70% energy savings compared to mercury vapor highbays
• Replaces 1000W
• 30,000 lumens Very high light output
• IP65 Water resistant
• Ceiling height up to 10 meters
• Dimmable 1-10V
• Instant start, no flickering and no buzzing
• Lasts on average 13.5 years (10 hours per day)
• Environmentally friendly and lead-free
• 5 Year warranty

Installation

This LED Highbay provides strong and bright light and is suitable for ceiling heights between 8 and 10 meters. This LED highbay is therefore suitable for spaces where a lot of strong light is needed such as; warehouses, storage rooms, sports halls, factory halls, and garages. Due to its small size, this LED UFO highbay can be easily placed anywhere and can be directly connected to the power network with an input voltage of 220-240V AC. The highbay has a strong iron loop with a diameter of 30 mm at the top to which it can be hung. With the 24 cm safety cable with carabiner hook, the highbay can be additionally secured; this cable can also be used to hang the highbay straight or tilt it.

The highbay has 2 cables of 30 cm. The thick cable can be connected directly to the power grid, or with a power cord for a socket. The thin cable is for dimming the highbay and can be connected to a 1-10V dimmer. Dimming is optional; if the dim cable is not used, we recommend terminating it with a (waterproof) terminal block or connector.

Sustain and save

This UFO highbay is a replacement for a conventional 1000W mercury vapor lamp, allowing you to save up to 70% on energy (and energy costs) without compromising on the light output of the lamp. This highbay has 280 high-lumen LED chips of the SMD3030 type with a lumen efficiency of 150 lumens per watt. For this 200W highbay, this totals an impressive 30,000 lumens.

Calculate how much you will save here

Dimmable

This UFO highbay is optionally dimmable and contains a Philips Xitanium (dimmable) LED driver. You can set the light to the desired brightness. The Philips Xitanium LED driver requires a 1-10V LED dimmer. Note that a traditional (LED) dimmer does not work with this highbay and could cause a short circuit.

View all 1-10V LED Dimmers here

Water resistant

This LED highbay has an IP65 rating. It is dustproof and water-resistant, making it suitable for installation in humid environments. The lamp is protected against water up to 100 liters per minute. A tap delivers about 12-16 liters per minute, so it can handle quite a bit but cannot be submerged.

Read more about IP ratings and lamp protection here

Reflector cap

Do you want to illuminate specific surfaces or objects particularly well? Then this lamp can be extended with a reflector cap. This allows you to create a smaller light angle of 75°.

Light color

To determine the right light color, it is important to know what the light is for. Below is a description of where the different light colors are most commonly used.

• 3000K has a somewhat yellow/orange glow. Ideal for a warm, cozy, and calming atmosphere in living rooms, waiting areas, cafés, restaurants, corridors, and other common areas.
• 4000K has a white/yellow glow. Ideal for a well-lit space where good visibility, focus, and a pleasant atmosphere are desired, such as in offices, classrooms, kitchens, hallways, shops, fitting rooms, hair salons, stairwells, or waiting areas.
• 6000K has a white/light blue glow. Ideal for a well-lit space where good visibility and concentration are desired, such as in hospitals, laboratories, workshops, studios, and garages.

Click here for more information about light color