
Vraag een offerte aan
U ontvangt binnen 24 uur een offerte van ons
Betaal veilig en gemakkelijk met de betaalmethode die jij wilt.
Description
Description
In short
- IP65 For outdoor or humid environments
- Easy to shorten or extend
- Extension: 12V max. 10m - 24V max. 20m
- Energy-efficient consumption - 14.4W per meter
- 60 LED chips per meter
- Dimensions: 5000x10x2.3 mm
- Strong 3M adhesive strip for easy installation
- Excl. power adapter
- Lasts on average 13.5 years (10 hours per day)
- 3 years warranty
High quality
This RGB LED strip is made of high-quality plastic and has an epoxy protective layer to keep the strip water-resistant. The back features a 3M adhesive strip, making it very easy to install. The strip has a standard length of 5 meters, but this can easily be adjusted by cutting the strip or by connecting multiple strips together. This SMD5050 LED strip has an IP65 protection rating. This means that the strip is resistant to water or moisture. The strip can be placed in humid areas or outdoors between temperatures of -25°C to 40°C.
Water-resistant LED Strip
This LED Strip has an IP65 rating. It is water-resistant dustproof and can therefore be installed in humid areas. The strip is protected against water up to 100 liters per minute (a tap delivers about 12-16 liters per minute).
Read more about IP values and lamp protection here
Extending or shortening LED strip
This RGB SMD5050 LED strip is very easy to cut to shorten or extend. Cutting can be done in the middle of the copper pads where a + and - are indicated. These can easily be clicked into a connector or capped with a cover.
With a voltage drop of about 0.1V per meter, the brightness of the LEDs is maintained along the entire length of the strip. For optimal performance, we recommend extending the LED Strip to the following maximum lengths:
LED Strip 12V
For optimal performance, we recommend not extending the length of this 12V strip longer than 10 meters. This way, you maintain an even light effect without noticeable loss in brightness.
LED Strip 24V
For optimal performance, we recommend not extending the length of this 24V strip longer than 20 meters. This way, you maintain an even light effect without noticeable loss in brightness.
The right power supply
To connect the LED strip, you need a power adapter. This LED strip operates on 12V/24V and must be converted with an adapter. Choosing the right adapter is important to get the most out of the LED strip and to prevent insufficient power from flowing through the strip.
Ensure that the total wattage of the power adapter is at least 20% higher than the wattage of the LED strip. (Example: 5 meters = 72W | 72x1.2= 86.4 | Therefore, a power adapter with a capacity of at least 86.4W is needed. We recommend 100W)
LED Strip 12V
- 1m-5m: Power adapter IP67 12V 100W
- 5m-10m: Power adapter IP67 12V 200W
LED Strip 24V
- 1m-5m: Power adapter IP67 24V 100W
- 5m-10m: Power adapter IP67 24V 200W
- 10m-15m: Power adapter IP67 24V 260W
- 15m-20m: Power adapter IP67 24V 350W
RGB Controller with Remote Control
This controller is optional and suitable for both 12V and 24V RGB LED strips. This controller operates on batteries and uses wireless RF technology, allowing you to effortlessly adjust colors, brightness, and lighting modes without being hindered by cables or limitations.
Brightness Consistency
Based on 24V 5 meters
Length |
1m |
2m |
3m |
4m |
5m |
Voltage |
23.58 |
23.21 |
22.98 |
22.92 |
22.91 |
Brightness |
1432.12 |
1259.04 |
1151.45 |
1123.39 |
1118.71 |
Decrease |
0.00% |
-12.09% |
-19.60% |
-21.56% |
-21.88% |
Applications for LED strips
This LED strip is suitable for both commercial and private use. The LED strip is often used in the following situations: Stand construction, escape rooms, shops, cafés and restaurants, public transport, living rooms, bedrooms, etc.
The possibilities are endless. For example, consider lighting along stair treads, lighting in cabinets, or lighting under a sofa or bed. In cafés, LED strips are often used to illuminate the bar. LED strips are also frequently used as ceiling lighting in a cove.
RGB - Colored light
To determine the right light color, it is important to know what the light is for. Our RGB lighting gives you the option to choose and adjust any desired color for a unique and personal atmosphere.
Click here for more information about light color
Specifications
Specifications
-
EAN
-
Dimensions (lxbxh)
-
Wattage
-
Dimmable
-
IP Value
-
Linkable
-
Beam angle
-
Power Factor
-
Adhesive strip
-
LED type
-
Material
-
CRI Value
-
Rated lifespan
-
Working temperature
-
Voltage
-
Input current
-
Certifications