LED Strip RGB 5 meters SMD5050 Pro-X 60LEDS/m

In short

• Easy to shorten or extend
• Extension: 12V max. 10m - 24V max. 20m
• Energy-efficient consumption - 14.4W per meter
• 60 LED chips p/m
• Dimensions: 5000x10x2.3 mm
• Strong 3M adhesive strip for easy installation
• Excl. power adapter
• Lasts on average 13.5 years (10 hours per day)
• 3 years warranty

High quality

This RGB LED strip is made of high-quality plastic and is very flexible. The back has a 3M adhesive strip, making it very easy to install. The strip has a standard length of 5 meters, but this can easily be adjusted by cutting the strip or by connecting multiple strips together. This SMD5050 LED strip has an IP20 protection rating. This means that the strip is not resistant to water or moisture. Therefore, only place the strip indoors between a temperature of -25°C to 40°C.

Extending or shortening LED strip

This RGB SMD5050 LED strip is very easy to cut to shorten or extend. Cutting can be done in the middle of the copper pads where a + and - are indicated. These can easily be clicked into a connector or capped with a cover.

With a voltage drop of approximately 0.1V per meter, the brightness of the LEDs is maintained over the entire length of the strip. For optimal performance, we recommend extending the LED Strip to the following maximum lengths:

LED Strip 12V

For optimal performance, we recommend not extending the length of this 12V strip longer than 10 meters. This way, you maintain an even light effect without noticeable loss in brightness.

LED Strip 24V

For optimal performance, we recommend not extending the length of this 24V strip longer than 20 meters. This way, you maintain an even light effect without noticeable loss in brightness.

The right power supply

To connect the LED strip, you need a power adapter. This LED strip operates on 12V/24V and must be converted with an adapter. Choosing the right adapter is important to get the most out of the LED strip and to prevent insufficient power from flowing through the strip.

Make sure that the total wattage of the power adapter is at least 20% higher than the wattage of the LED strip. (Example: 5 meters = 72W | 72x1.2= 86.4 | Therefore, a power adapter with a capacity of at least 86.4W is needed. We recommend 100W)

LED Strip 12V

• 1m-5m: Power adapter 12V 100W
• 5m-10m: Power adapter 12V 200W

LED Strip 24V

• 1m-5m: Power adapter 24V 100W
• 5m-10m: Power adapter 24V 200W
• 10m-15m: Power adapter 24V 260W
• 15m-20m: Power adapter 24V 350W

RGB Controller with remote control

This controller is optional and suitable for both 12V and 24V RGB LED strips. This controller operates on batteries and uses wireless RF technology, allowing you to effortlessly adjust colors, brightness, and lighting modes without being hindered by cables or limitations.

Brightness Consistency

Based on 24V 5 meters

Applications for LED strips

This LED strip is suitable for both commercial and private use. The LED strip is often used in the following situations: Stand construction, escape rooms, shops, cafés and restaurants, public transport, living rooms, bedrooms, etc.

The possibilities are endless. For example, consider lighting along stair treads, lighting in cabinets, or lighting under a sofa or bed. In cafés, LED strips are often used to illuminate the bar. LED strips are also frequently used as ceiling lighting in a cove.

RGB - Colored light

To determine the right light color, it is important to know what the light is for. Our RGB lighting gives you the option to choose and adjust any color you desire for a unique and personal atmosphere.