LED Driver flicker-free 36W 800mA / 40W 900mA / 45W 1050mA

In brief

• 36W 800mA / 40W 900mA / 45W 1050mA
• Anti light nuisance - productivity enhancing
• No flickering during photography
• Easy connection
  
• Constant current
• DC connector
• 50,000 hours
• 2 Years warranty

Flicker-free

Many light panels have flickering light. This is not visible to the naked eye. You can often see it by pointing a camera at the light; the image will flicker. You do not consciously experience this flickering, but it can affect aspects such as focus, fatigue, irritated or tired eyes, headaches, or a general irritated feeling. A flicker-free LED driver has a special chip that prevents the light from flickering (invisibly). This can increase productivity and mood.

LED driver 36W

This external LED driver has an output current of 800mA and is suitable for LED panels with 700-800mA output current. You can also use this LED driver for other types of LED lighting.

LED driver 40W

This external LED driver has an output current of 900mA and is suitable for LED panels with 850-900mA output current. You can also use this LED driver for other types of LED lighting.

LED driver 45W

This external LED driver has an output current of 1050mA and is suitable for LED panels with 950-1050mA output current. You can also use this LED driver for other types of LED lighting.

Always check the specifications of your lamp to see if the mA matches between the lamp and the driver. The mA of the LED driver may be slightly higher than that of the lighting.

Connecting the LED driver

This driver is easy to connect to, for example, an LED panel. Always make sure you work without power when connecting a driver.

This driver has 3 wires: an L and N wire, and a DC connector.

1. The L and N wires are connected directly to the mains; you can do this safely and quickly with terminal blocks/connector clamps. Use one per wire, so you need 2 in this case.
2. Finally, click the DC connector onto the LED panel.