LED Strip 5 meters SMD5050 Pro-X 60LEDS/m IP65

In short

•  IP65 For outdoor or humid environments
• Easy to shorten or extend
• Extension: 12V max. 10m - 24V max. 20m
• Energy-efficient consumption - 14.4W per meter
• Luminous output: 1440lm per meter
• 60 LED chips per meter
• Dimensions: 5000x10x2.3 mm
• Strong 3M adhesive strip for easy installation
• Excl. power adapter
• Lasts on average 13.5 years (10 hours per day)
• 3 years warranty

High quality

This LED strip is made of high-quality plastic and is very flexible. The back has a 3M adhesive strip, making it very easy to install. The strip has a standard length of 5 meters, but this can easily be adjusted by cutting the strip or by connecting multiple strips together. This SMD5050 LED strip has an IP65 protection rating. This means that the strip is resistant to water or moisture. The strip can be placed in humid areas or outdoors between a temperature of -25°C to 60°C.

Water-resistant LED Strip

This LED strip has an IP65 rating. It is water-resistant and dustproof and can therefore be placed in humid areas. The strip is protected against water up to 100 liters per minute (a tap provides about 12-16 liters per minute).

Read more about IP ratings and lamp protection here

Extending or shortening LED strip

This SMD5050 LED strip is very easy to cut to shorten or extend. Cutting can be done in the middle of the copper pads where a + and - are indicated. These can easily be clicked into a connector or capped with a cover.

With a voltage drop of approximately 0.1V per meter, the brightness of the LEDs is maintained over the entire length of the strip. For optimal performance, we recommend extending the LED Strip to the following maximum lengths:

LED Strip 12V

For optimal performance, we recommend not extending the length of this 12V strip longer than 10 meters. This way, you maintain an even light effect without noticeable loss in brightness.

LED Strip 24V

For optimal performance, we recommend not extending the length of this 24V strip longer than 20 meters. This way, you maintain an even light effect without noticeable loss in brightness.

The right power supply

To connect the LED strip, you need a power adapter. This LED strip operates on 12V/24V and must be converted with an adapter. Choosing the right adapter is important to get the most out of the LED strip and to prevent insufficient power from flowing through the strip.

Ensure that the total wattage of the power adapter is at least 20% higher than the wattage of the LED strip. (Example: 5 meters = 72W | 72x1.2= 86.4 | Therefore, a power adapter with a capacity of at least 86.4W is needed. We recommend 100W).

LED Strip 12V

• 1m-5m: Power adapter IP67 12V 100W
• 5m-10m: Power adapter IP67 12V 200W

LED Strip 24V

• 1m-5m: Power adapter IP67 24V 100W
• 5m-10m: Power adapter IP67 24V 200W
• 10m-15m: Power adapter IP67 24V 260W
• 15m-20m: Power adapter IP67 24V 350W

Brightness Consistency

Based on 24V 5 meters

Applications for LED strips

This LED strip is suitable for both commercial and private use. The LED strip is often used in the following situations: Stand construction, escape rooms, shops, cafés and restaurants, public transport, living rooms, bedrooms, etc.

The possibilities are endless. For example, consider lighting along stair treads, lighting in cabinets, or lighting under a sofa or bed. In cafés, LED strips are often used to illuminate the bar. LED strips are also frequently used as ceiling lighting in a cove.

Light Color

To determine the right light color, it is important to know what the light is for. Below is a description of where the different light colors are most commonly used.

• 2400K has a soft orange glow. Comparable to candlelight or a late sunset. Ideal for creating a warm, cozy, and calming atmosphere in living rooms, cafés, restaurants, and other spaces that do not require bright light.
• 3000K has a slightly yellow/orange glow and is a bit brighter than 2700K but still warm. Ideal for creating a warm, cozy, and calming atmosphere in living rooms, waiting areas, cafés, restaurants, hallways, and other common areas.
• 4000K has a white/yellow glow. Ideal for a well-lit space where good visibility, focus, and a pleasant atmosphere are desired, such as in offices, classrooms, kitchens, hallways, shops, fitting rooms, hair salons, stairwells, or waiting areas.
• 6000K has a white/light blue glow. Ideal for a well-lit space where good visibility and concentration are desired, such as in hospitals, laboratories, workshops, studios, and garages.