LED Strip SMD5050 60 LEDs/m | 5 meters

In brief

• Easy to cut or extend
• Extension: 12V max. 10m - 24V max. 20m
• Energy efficient - 14.4W per meter
• Light output: 1440 lm per meter
• 60 LED chips per meter
• Dimensions: 5000x10x2.3 mm
• Strong 3M adhesive frame for easy installation
• Excl. power adapter
• Average lifespan 13.5 years (10 hours per day)
• 3 years warranty

High quality

This LED strip is made of high-quality plastic and is very flexible. The back has a 3M adhesive strip making it very easy to install. The strip has a standard length of 5 meters, but this can easily be adjusted by cutting the strip or connecting multiple strips together. This SMD5050 LED strip has an IP20 protection rating. This means the strip is not resistant to water or moisture. Therefore, place the strip indoors only between temperatures of -25°C to 60°C.

Extending or cutting the LED strip

This SMD5050 LED strip is very easy to cut to shorten or extend. Cutting can be done in the middle of the copper plates marked with + and -. These can easily be clicked into a connector or sealed with a cap.

With a voltage drop of about 0.1V per meter, the brightness of the LEDs is maintained over the entire length of the strip. For optimal performance, we recommend extending the LED strip to the following maximum lengths:

LED Strip 12V

For optimal performance, we recommend not extending this 12V strip longer than 10 meters. This ensures an even light effect without noticeable loss of brightness.

LED Strip 24V

For optimal performance, we recommend not extending this 24V strip longer than 20 meters. This ensures an even light effect without noticeable loss of brightness.

The right power supply

To connect the LED strip you need a power adapter. This LED strip operates on 12V/24V and must be powered by an adapter. Choosing the right adapter is important to get the maximum out of the LED strip and to prevent insufficient power supply.

Make sure the total wattage of the power adapter is at least 20% higher than the power consumption of the LED strip. (Example: 5 meters = 72W | 72x1.2= 86.4 | Therefore, a power adapter with at least 86.4W is needed. We recommend 100W.)

LED Strip 12V

• 1m-5m: Power adapter 12V 100W
• 5m-10m: Power adapter 12V 200W

LED Strip 24V

• 1m-5m: Power adapter 24V 100W
• 5m-10m: Power adapter 24V 200W
• 10m-15m: Power adapter 24V 260W
• 15m-20m: Power adapter 24V 350W

Applications for LED strips

This LED strip is suitable for both commercial and residential use. It is often used in trade shows, escape rooms, shops, cafés and restaurants, public transport, living rooms, bedrooms, etc.

The possibilities are endless. Think of lighting along stairs, lighting inside cabinets, or lighting under a sofa or bed. In cafés, LED strips are often used to illuminate the bar. LED strips are also commonly used as ceiling lighting in coves.

Light color

To determine the right light color, it is important to know the purpose of the light. Below is a description of the most common uses of different light colors.

• 2400K has a soft orange glow. Comparable to candlelight or a late sunset. Ideal for a cozy, warm, and relaxing atmosphere in living rooms, cafés, restaurants, and other spaces that do not require bright light.
• 3000K has a slightly yellow/orange glow and is a bit brighter than 2700K but still warm. Ideal for a cozy, warm, and relaxing atmosphere in living rooms, waiting rooms, cafés, restaurants, corridors, and other general spaces.
• 4000K has a white/yellow glow. Ideal for well-lit spaces where good visibility, focus, and a pleasant atmosphere are desired, such as offices, classrooms, kitchens, hallways, shops, fitting rooms, hair salons, stairwells, or waiting rooms.
• 6000K has a white/light blue glow. Ideal for well-lit spaces where good visibility and concentration are needed, such as hospitals, laboratories, workshops, studios, and garages.

Click here for more information about light color