Emergency battery for external LED drivers up to 180 minutes

In brief

• Provides power for up to 3 hours
• Lithium Battery capacity (LiFePO4), 2200mAh
• Replaceable battery
• Easy to connect to current LED driver
• With indicator light
• DC connection
• Suitable for LED lighting up to 120lm/W
• 2 Year warranty

Emergency battery

This lithium emergency battery is specially designed for external LED drivers and has a capacity of (LiFePO4) 1500mAh, 2200mAh. It is suitable for LED panels up to 80 watts. You can also use this emergency battery for other types of LED lighting with an external LED driver and a light output of max. 120lm/W.

Fully charging the battery takes 16 hours. During charging and when the battery is full, the indicator light glows green. Once the emergency battery activates, the indicator light no longer glows.

• Model number: YH25B-3031050Li

Power specifications

• Nominal input voltage: 220-240V AC, 50-60Hz
• AC input current: max 50mA
• Nominal AC input power 4.0 W max
• Power factor: >0.5
• Emergency power output 2.8 watt DC10...50V (3-15 LEDs) constant current output.
• Output voltage DC10...50V, DC55V max (SELV)
• Battery capacity (LiFePO4) 1500mAh, 2200mAh
• Battery charging current: 0-250mA
• 1, 1.5, 2, 3 hour nominal duration

Installation

This emergency battery for LED drivers is easy to connect. Always make sure you work without power when connecting a driver.

The battery has 4 cables: a DC connector for the LED driver, a DC connector for the lighting (panel), an AC cable for the LED driver, and an AC cable for the power supply (L, N, T).

1. Click the DC connectors onto the driver and the panel.
2. Connect the L and N wires to the driver.
3. Connect the L and N (T) wires directly to the power supply. You can do this safely and quickly with connector clamps.
4. Finally, make a 20mm hole for the indicator light.